💸 SAVE $$ ON ALL OUR PRODUCTS BY USING CUPON: DEVINE
Overwatch Artemis
How to use:
Please make sure you read this article before using any cheat!
-Please make sure that your Antivirus (external or Windows Defender), as well as your Firewall, are all disabled before using the cheat.
Artemis Does Require Your Secure Boot Disabled To Properly Work.
A good way to know it is disabled is by opening the command line “cmd” by using the windows searcher and opening it as administrator. Once opened write the following lines.
Bcdedit -Set TESTSIGNING OFF
Once opened write : bcdedit -set TESTSIGNING OFF. In case you do receive the message: “The operation completed successfully”, it means your secure boot is already disabled, on the other hand in case you do receive a message that it is protected by the secure boot protocol, first you will have to disable the secure boot it in your BIOS. –> GUIDE
The first thing we got to do is to login through our Blizzard account and have a registered copy of Overwatch. In case you don’t have one account, create it.
Step 1. Open Artemis Launcher as an administrator
Step 2. The first time you open the Loader you will have to register an account. Click on Create new account for Maveable Network.
Fill the form that appears from a new window and make sure to keep your credentials saved as this process can only be done once per device. The account will be bound to the machine and only 3 HWID resets are allowed per account. Also, you cannot create a new account from the same device.
Keep that in mind and operate wisely on this step. Once it’s done click on Register.
Step 3. Log in with your recently created credentials.The main loader should then appear displaying your username, e-mail as well as the activation tab. Click on it. First part:
*In my case it has been delivered like this:
Step 4. A confirmation window should appear, from here we can turn back to the main login and use our recently created credentials but before Confirm your registration. You receive an email to the registered account.
After clicking the Activation tab look on the left side and click the Overwatch game. Paste the serial key obtained from selly inside the empty case and then press “Check the License information”. This feature will display the remaining time and key type you’re using. Finally, click on Activate to start using that key code. Second Part:
Step 5. *Make sure to open the game once this label is visible to you!
*An unique generated build for you will be created. This unique system will prevent any type of cheat related bans.
The expiration time should be displayed. At this point, the LOAD tab should be enabled. Press the button LOAD located down below and wait for the next label to appear.
Note: In case you suffer from FPS drop while playing, do activate the Enable Vsync option to match the cheat with your monitor refreshing rate.
Step 6. Make sure that your game is running in borderless mode or window mode by using the game options. For this example, I have set my game in borderless mode and 1920×1080 resolution.
Open the Blizzard Agent, Select Overwatch and the region you are going to be using the cheat and click on Play.
Step 7. The cheat will ask you to select the desired Language (English, Chinese or Korean) and once is chosen, the menu will automatically be loaded on the right side of the screen. To operate, select an Interface key, in my case I have set it to HOME (To open close the menu).The Entity toogle set to F12 (switch between enemies and friendly targets) END button to fully close the menu in case you wanna stop the cheat working (You will have to load the cheat again). Some other keys I have put are ESP- F1 and Aimbot to F2. Menu Loaded ingame:
Step 7. In order to continue with the injection once you have opened the game, press 2 times the left mouse click in order to inject the cheat into Overwatch, like shown
Troubleshoot:
Most of the common errors found in Artemis got a simple fix. Here I leave a list of the most common found and how to get them solved.
[!] For Error Code 0:
1) Uninstall BitDefender (If Available)
2) Reboot Your PC
3) Disable Secure Boot
[!] For Error Code 4:
1) Reboot Your PC
2) Check Your Internet Connection
3) Wait Few Minutes and Try Again
[!] For No Error Code (Tmp error or not working ESP or Aimbot):
1) Disable Secure Boot
2) Reboot Your PC
3) Disable Anti-Virus or Firewall
4) Use VPN
[!] For Driver not Loading ingame.
1)Go to %AppData%
2)Find the random file names
3)Delete all folders with random names
4)Re-run the cheat.
[!] For Untrusted machine error.
1) Close all application
2) Go to %AppData%
3) If there is any folder named “DnSpy”, remove it
4) Reboot the PC (Clean Reboot)
5) Check the running application (no debuggers or traffic monitors such as httpdebug, fiddler and wireshark)
6) If any is running, close it by clicking End Task
7) Run the loader again
8 )If that does not work, put the loader into a USB
HOW TO USE :
Please make sure you read this article before using any cheat!
-Please make sure that your Antivirus (external or Windows Defender), as well as your Firewall, are all disabled before using the cheat.
Important things need to be done before using the cheat:
Disable the secure Boot: Due the nature of the cheat using a driver, it is important to have this feature disabled in your BIOS. An easy way to know if your Secure Boot is already disabled is by opening the Command Prompt as administrator and write the following lines:
bcdedit -set TESTSIGNING OFF
In case you receive “Protected by the Secure Policy” status then read this GUIDE to know on how to disable the secure Boot.
Virtualization Enabled: There is an easy way to know if your virtualization is enabled or not. Use the task manager then check on Performance tab and finally verify that your virtualization is in effect enabled, otherwise like the BIOS, check how to enable this feature in your CPU model and if your current CPU support this technology.
FastBoot:This feature should not impact the performance in your PC, but in some cases this is needed to avoid further problems. In case you don’t know how to disable it, then read this GUIDE to know on how to.
Another Feature That Needs To Be Checked Is The Paging File Size. Here I Leave The Procedures For Minimum And Maximum Values:
Search: View advanced system settings/Advanced System settings /Advanced/ Settings /Change
–> Disable the Automatic option and set initial size to 5000 and maximum to 10000 and confirm.
Other Features That May Cause Conflict With The Cheat And Need To Be Stopped/Disabled:
– Uninstall any PC Cleaning Software or Antivirus (BleachBit, Glary Utilities, CCleaner, FSlint, PC Tuneup, Kaspersky etc…)
– Run msconfig > Click startup > Disable all automatically starting programs > Restart PC
– Run msconfig > Click services > Hide all Microsoft services > Disable all services besides BattlEye Service, EasyAntiEbook and GPU Driver
– Disable Hyper-V (Search > Turn Windows Features on or off > Untick Hyper-V)
– Disable EVERY OVERLAYS POSSIBLE (Origin, Uplay, Steam, WindowsGameBar)
– Disable VT-D in BIOS
STEP 1.
Extract and open the INTEL loader as an administrator.
STEP 2.
The loader should become visible. From here paste the serial key you have obtained from the shop and then click Login.
*The loader should check for possible updates and prepare your system. In case this loader self close. Open it one more time.
*The cheat will request you permission to spoof your HWID.
*Once confirmed the spoofer. The cheat will request you a sytem restart, press OK and restart your machine
The spoofer is applied while you restart (In case you have selected to use it)
STEP 3.
*The cheat will request you permission to spoof your HWID. Do not use the spoofer!! It's not updated and might lead you to a ban!!!
The spoofer is applied while you restart (In case you have selected to use it)
STEP 4.
When you’re back from restarting, open the loader again and insert your key one more time. A new window should be displayed. Select the game, in this case DayZ and click LOAD CHEAT.
*A final window will appear. Click No by default (No other cheats)
The loader will self close at this point. Proceed to the next step.
Note 1: Once the cheat has been loaded, you can open the game as many times you want and the cheat will be loaded. No need to reinject until you restart your machine
Note 2: If you have used the Spoofer, restart your machine before reinjecting again
Note 3: In case the loader ask you to restart the machine, do not restart, simply, open the loader again.
STEP 5.
Open Overwatch 2 from Steam.
STEP 6.
If everything is done and no issues appear, you should be able to see the FOV circle once you reach the lobby. To operate with the menu use the Button DELETE and to fully close it (need cheat restart) use the button END.
Important: If you are unable to see the menu ingame even if you got Cheat Loaded! message. Be sure your Discord overlay is not active.
TIPS:
this cheat does require having the following: Virtualization Enabled, Secure Boot Disabled and Fast Boot disabled, this guide will explain briefly how to do them.
you should use Borderless mode and a resolution of 1920×1080 in-game
This cheat is designed for Intel – users, and NOT AMD SUPPORT for now.